Adjustable Hillside Terrace Solar Ground Mounting Structure
Adjustable hillside terrace solar ground mount structure can be adjusted from east-west and north-south directions, with special connector design.The Patented and certified of ground mount solar system design ensures safe and fast installation.
System Structure of ground mount solar
Technical Parameters of ground mount solar system
|
System Name |
solar mounting structure system |
Panel Layout |
Landscape or Portrait |
|
Foundation |
Ground Screw,Concrete Based |
Material |
Anodized AL6005-T5 |
|
Tilt Angle |
0-60degrees |
Fastener |
SUS304 &Zinc-Nickel Alloy Electroplated Steel |
|
Snow Load |
1.6KN/㎡ |
Color |
Customized or Silver |
| Wind Load | 60m/s |
Design Standard |
AN/NZS1170,DIN1055,JIS C8955,etc. |
|
Applicable Solar Module |
Framed or Frameless |
Warranty |
10 Years |
| Ground Clearance | 200-2000mm | Small Components | Anodized AL-6005-T5 |
Components Details of ground mount solar system
|
Specification：L260mm Components:Splice for Cross Beam,Hexa Self-Tapping Screw with EPDM Washer ST6.3*19
|
 Cross BeamSpecification：L*71*85 Standard Length：3100mm,4100mm,5100mm |
 Pre-Assemble Support
Components:Cross Beam ，C Clamp Kit ， T Back Jointer，Flat Washer M8， Spring Washer M8
Hexagon Bolt M8*25
|
 T Adjustable Anchor Plate Kit
Material：AL6005-T5（Anodized ） Can adjustable up and down & left and right
|
 Wide End ClampKit
Components:Wide End Clamp, Cross Module, Spring Washer M8,Hexagon Socket Bolt |
 Inter Clamp KitComponents：Inter Clamp,Cross Module Spring Washer M8,Hexagon Socket Bolt |
 C Clamp Kit
Components:C Clamp, Cross Module,Spring Washer M8 Hexagon Socket Bolt |
 Corrugated T Anchor Plate Kit Components:Corrugated Gasket,Corrugated T Plate Hexagon Bolt Kit Material:AL6005-T5（Anodized ） |
Installation Guide of ground mount solar
1.Install ground screw based on project solution.
2.Install Pro-T Corrugated Anchor Plate.
3.Install rail.
4.Install Back Side Support.
5.Install T Adjustable Anchor Plate Kit.
6.Install Beam.
7.Fix the solar module with Inter Clamp Kit & End Clamp Kit.
8.Installation is done.
Free Design Service of solar ground mounting kits
We provide free customized design service for solar ground mount.
Regarding better service, please provide below detail before design.
1. The dimension of the solar panel: _________(L*W*T)
2.What is the installation angle?: _______degree.
3.How is weather there, such as wind speed and snow load?___m/s anit-wind speed and____KN/m2 snow load
4.The pv array?_____
5.Which foundation you need for your coming ground mounting system? ______( ground screw/concrete/pile/pole )
6.The height of panel lowest end off ground?______
7. How many panels do you plan to install for the project?______pcs.
How to buy of solar mounting structure from us ?
Please refer our FAQ to get more in details information.
